Bottle Cooler Repairs β DK Services NW
Bottle cooler and back-bar fridge repairs for Manchester pubs and bars: coolers not getting cold, icing up, noisy or with failed door seals and lights. All makes covered across Greater Manchester and the Northwest.
Our engineers carry a full van stock of parts for all major bottle cooler brands. Whatever the fault β we have seen it before and we know how to fix it fast.
Compressor failure, refrigerant loss or condenser blockage. The most common fault β we diagnose and repair quickly.
Thermostat or temperature sensor fault causing the unit to run too cold. We carry thermostats for all major brands.
Compressor failure is the most serious fault. We assess whether repair or replacement is the most cost-effective option.
Worn or damaged door seals cause warm air ingress and poor efficiency. We carry seals and replace on the first visit.
A failed evaporator or condenser fan motor prevents effective cooling. We carry fan motors for all major brands.
Usually caused by door seal failure or a drainage blockage. We identify the root cause and fix it fast.
Back-bar bottle coolers work hard in warm, enclosed spaces, so most faults are in the refrigeration, fans, thermostats or door seals. We repair single, double and triple-door back-bar coolers and upright display fridges from the main brands.
If your bottle cooler is old and struggling, hiring a replacement can be simpler than repeat repairs. Back-bar bottle coolers hire from Β£10 to Β£15 a week and upright coolers from Β£20 to Β£25, with free callouts and repairs for life and two services a year. Find out more about our hire plans β
Bottle coolers often struggle for simple reasons. Try these first, and if it's still not cold, give us a call.
Back-bar coolers pull in dust and grease. A clogged condenser grille is the most common reason a cooler stops getting cold.
Coolers pushed tight against walls or under counters can't vent heat. Keep the front grille clear and leave space where the design needs it.
Close the door on a sheet of paper. If it slides out easily, the seal is letting warm air in and making the cooler work too hard.
Packing bottles against the fan or back wall blocks the cold air from circulating, leaving warm spots at the front.
Dials get knocked during cleaning or restocking. Make sure the setting hasn't been turned down before booking a callout.
Fill in your details and one of our engineers will call you back as quickly as possible. For urgent breakdowns please call us directly on 0161 303 2337.
Common causes are a dirty condenser, a failed fan motor, a faulty thermostat, or a refrigeration fault such as a gas leak or compressor problem. Our engineers test each one to find the cause.
Heavy ice usually points to a failing door seal letting moist air in, or a thermostat or defrost problem. Clearing the ice alone won't fix it; the cause needs sorting.
A rattling or grinding cooler often has a worn fan motor or a struggling compressor. It's worth getting it checked before it fails completely on a busy night.
Yes. We replace door seals, LED lights, locks and hinges on back-bar coolers as well as repairing the refrigeration.
Yes. Bottle coolers on hire from DK Services include free callouts and repairs for the life of the agreement, plus two services a year.