Ice Machine Repairs β DK Services NW
Commercial ice machine repairs for Manchester bars, restaurants and hotels: machines making no ice, small or hollow cubes, leaking or icing up. Engineers covering Greater Manchester, Liverpool and the Northwest.
Our engineers carry a full van stock of parts for all major ice machine brands. Whatever the fault β we have seen it before and we know how to fix it fast.
Compressor fault, refrigerant leak or sensor failure. Our engineers carry diagnostic tools and identify the cause quickly.
Usually caused by water flow issues, incorrect water temperature or a failing water pump. We diagnose and fix on site.
Faulty water inlet valve, cracked water tray or loose connections. We carry inlet valves and water tray components.
Control board fault, power supply issue or safety cutout triggered. We carry control components for major ice machine brands.
Usually a scale or bacteria build-up. We carry out a full descale and sanitise β important for food safety compliance.
Compressor failure or refrigerant loss. Our engineers are trained to handle refrigerant-related repairs safely.
Ice machines go wrong differently from washers. Most problems come from the refrigeration system, the water supply, scale build-up or a dirty condenser. We repair the common commercial brands below, from small under-counter units to large-capacity machines.
If your ice machine can't keep up on busy nights, a larger or newer machine on hire may be the better fix. Ice machines hire from Β£18 a week (22kg) up to Β£40 a week (240kg), with free callouts and repairs for life and two services a year. Find out more about our hire plans β
A few simple checks can rule out the easy causes. If the machine still isn't making ice properly, call us.
No water, no ice. Make sure the supply tap is fully open and any inline water filter isn't overdue for changing.
Dust and grease on the condenser stop the machine shedding heat, so it makes less ice or stops. Brush or vacuum the grille gently.
Ice machines in hot cellars or tight back-bar spaces struggle, especially in summer. Keep the vents clear and leave space around the unit.
White scale on the evaporator or water parts slows ice production and causes small cubes. Descaling is part of a proper service.
A full storage bin or a blocked bin sensor makes the machine stop on purpose. Empty some ice and see if it restarts.
Fill in your details and one of our engineers will call you back as quickly as possible. For urgent breakdowns please call us directly on 0161 303 2337.
The most common causes are no water reaching the machine, a blocked filter, a dirty condenser, or a refrigeration or sensor fault. Our engineers check the water, electrical and refrigeration sides to find the actual cause.
Small or hollow cubes usually mean low water flow, scale build-up, or the refrigeration not reaching full temperature. A clean, descale and refrigeration check normally sorts it.
Leaks usually come from a blocked drain, a split drain hose, or a water inlet valve that isn't closing. We can trace the leak and repair it on site.
It depends on your water hardness and how hard the machine works, but ice is food, so regular cleaning matters for hygiene as well as performance. Our services include cleaning and descaling.
Yes. Ice machines on hire from DK Services include free callouts and repairs for the life of the agreement, plus two services a year.